Veneer Drying Production Line: Integrated Drying System with Superior Performance

The veneer drying production line is a complete set of drying equipment featuring simple operation, safety, practicality, stable operation, easy maintenance, and integrated processes including hot pressing, leveling, and drying in one cycle. Its hot air circulation system significantly reduces operational costs for enterprises while improving panel quality and increasing production capacity.

Product Range by Shandong Linqu Juneng Drying Equipment Co., Ltd.

The company manufactures a wide range of veneer drying machines, including:

• Veneer Dryers (wood veneer, eucalyptus veneer, poplar veneer)
• Wood Chip Dryers It seems that there is no text provided for translation. Please provide the text you would like me to translate. Wood Board Dryers
• Roller Dryers (double-roller, press-roller, cylindrical)
• Vertical Veneer Dryers

Available Heat SourcesIt seems that there is no text provided for translation. Please provide the text you would like me to translate.

1. Steam Heat Transfer
2. Hot Air Heat Transfer
3. Thermal Oil Heat Transfer
4. Air Energy (Heat Pump)

Heating MechanismIt seems that there is no text provided for translation. Please provide the text you would like me to translate.
Heat carriers (except hot air) heat a thermal air curtain via a centrifugal fan connected to the system, converting it into hot air. This hot air is then distributed through air ducts and nozzles to uniformly dry both sides of the veneer.

Key FeaturesIt seems that there is no text provided for translation. Please provide the text you would like me to translate.

• Chain-Driven Synchronized Rollers: The upper and lower rollers operate in sync, with the upper roller’s weight ensuring smooth veneer feeding and exceptional flatness in dried output.
• High Efficiency: Processes veneer thicknesses from 0.25mm to 3.0mm with stable operation, simple controls, and superior thermal efficiency.
• Ideal for Veneer Processors: A top choice for manufacturers seeking reliability and productivity.

Operational Guidelines

1. Installation Requirements

• The dryer must be installed on a level foundation by trained personnel, with horizontal tolerance ≤ ±3mmIt seems that there is no text provided for translation. Please provide the text you would like me to translate.
• If foundation settling or uplift occurs during operation, immediately halt the machine, recheck levelness, and inspect transmission components to prevent damage.

2. Material Loading

• Feed veneer longitudinally through the inlet, ensuring proper alignment (90° to rollers) for seamless entry.
• Trim veneer edges before drying to prevent jams.

3. Drying Parameter Adjustments

• Moisture Control: Adjust conveyor speed based on target moisture content (normal range: 8–10%).
  • For veneer ≤0.6mmIt seems that there is no text provided for translation. Please provide the text you would like me to translate.
    • Temperature: 110°C–130°C
    • Speed: 1,000–1,200 RPM
  • For veneer ≥0.8mmIt seems that there is no text provided for translation. Please provide the text you would like me to translate.
    • Temperature: 150°C–170°C
    • Speed: 800–900 RPM